+ Windows 7 DSL Setup Procedure
+ We thank you for choosing High-speed DSL Internet Service powered by PenTeleData. These instructions will guide you through the setup of your DSL service in Windows 7 and connect you to the Internet.
+
+ In the event that you have a question or trouble in setting up your account, please call our Technical Support Department at (800)281-3564, and follow the menu to get to Residential Technical Support.
+
+ If you received software with your DSL package, DO NOT install it in Windows 7! Windows 7 comes with all the software you need to connect to the Internet with PenTeleData, send and receive e-mail, and browse the Internet.
+
+ After you are finished with these instructions, you may want to put them in a safe place. These instructions may be a helpful reference in the future.
+
+ Let's Begin:
+
+ Close all applications or programs that may be open.
+ 1. Click the “Windows” menu (formerly known as the “Start” menu), then click “Control Panel.”
+
+
+
+ 2. Next, click on “Network and Internet.”
+
+
+
+ 3. Click “Internet Options.”
+
+
+
+ 4. The "Internet Properties" window will now open. Click on the "Connections" tab, as shown.
+
+
+
+ 5. Next, click the "Setup" button, as shown.
+
+
+
+ 6. The “Connect to the Internet” wizard will now appear. Click “Broadband (PPPoE)” to continue.
+
+
+
+ 7. You will now be asked to enter the username, password, and a connection name for your High-speed DSL Service.
+
+ If your High-speed DSL Service is provided by Ironton Telephone Company, enter your username followed by “@itcdsl” (without the quotes) in the “User name:” field.
+
+ If your High-speed DSL Service is provided by Palmerton Telephone Company, enter your username followed by “@ptelco-dsl” (without the quotes) in the “User name:” field.
+
+ After you have entered your username enter your password in the “Password:” field.
+
+ Note: User names and passwords are case sensitive. Please be certain that your capitalization is correct.
+
+ After you have entered the above information, enter “My DSL” in the field labeled “Connection name:.”
+
+ Note: If you would like to share this connection to other users on the computer place a check in the box labeled “Allow other people to use this connection.”
+
+ Click “Connect” to continue.
+
+
+
+ 8. Windows will now test your connection.
+
+
+
+ 9. Click on the “Close” button to finish the wizard.
+
+
+
+ Getting Connected to the Internet
+ To browse the web, you must open the program called “Internet Explorer.” This program can be found on the Windows Desktop (the big blue E on the screen) or in your Windows Menu (click on ”Start,” then click on “All Programs,” then click on “Internet Explorer”). After this is done, Internet Explorer will open and your start page will be displayed. Once Internet Explorer is open, you can then go to other websites by typing them into the address bar at the top of the Internet Explorer window (e.g. www.ptd.net ).
+
+ NOTE: Windows 7 does not include pre-installed e-mail software. To send and receive e-mail you will need to download and install
+ e-mail software. To obtain an e-mail program, you may visit the Microsoft website or other software manufacturers website. For a list of additional e-mail software or instructions on how to configure your e-mail clients to send and receive e-mail, Click HERE.
+
+