Light Patterns

Paradyne 6211-I1 DSL Modem – Front Panel

1. Power - LED will be solid green when the power supply is properly connected to the modem and the wall outlet
2. Status – LED will be solid if ADSL link is established and active
3. Activity – LED will flash when data transfer occurs
4. LAN – LED will be solid if LAN link is established, LED will flash when data transfer occurs
5. USB – LED will be solid if USB link is established


Elastic Network

1. Power - LED will be solid green when the power supply is properly connected to the modem and the wall outlet
2. Status – LED will be solid if link is established between modem and computer
3. Network – LED will flash when data transfer occurs
4. Transfer – LED will flash when data transfer occurs


Westell 2100/2200


1. Power - LED will be solid green when the power supply is properly connected to the modem and the wall outlet
2. Ready – LED will be solid if ADSL link is established and active
3. Ethernet – LED will be solid if Ethernet link is established, LED will flash when data transfer occurs
4. USB – LED will be solid if USB link is established, LED will flash when data transfer occurs

Paradyne Stormport 1020

1. Power - LED will be solid green when the power supply is properly connected to the modem and the wall outlet
2. Status/Xfer – LED will be green if ADSL link is established and active, will flash green when data transfer occurs

Connecting

1. Connect a telephone cable to your broadband DSL modem, and connect the other end to a telephone wall jack.

2. Connect the Ethernet/USB cable from the computer to your broadband DSL modem. If you have a router you should connect your computer to your router and connect your router to your modem.

Note: Do not connect both the Ethernet and USB cables to the same computer.

3. Connect the power cord to your broadband DSL modem and a wall outlet. If you have a router you should connect the power cord to your router and a wall outlet.

4. Your broadband DSL modem’s status LEDs should begin to flash when completing the connection of your broadband DSL modem. Within a few minutes the DSL modem should be ready to connect.

If you connected your broadband DSL modem via USB you will need to install USB drivers for your broadband DSL modem. Click here for help installing USB drivers for your broadband cable modem.